Stranded Loose Tube Self-supporting Aerial Fig.8 Fiber Optic Cable(GYTC8A)

Description: The fibers ,250μm，are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant,filling compound.A steel wire locates in the center of core as a metallic strength member.The tubes (and fillers) are strandedaround the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisturebarrier is applied around the cable core,this part of cable accompanied with the stranded wires as the supporting part are
completed with a polyethylene (PE) sheath to be figure 8 structure.Figure 8 cable DCTC8Y,DCTC8S are also available on request.This type of cable is specifically applied for self-supporting aerialinstallation.

Characteristics: High tensile strength of stranded wires meet the requirement of
self-supporting and reduce installation cost
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
The following measures are taken to ensure the cable
watertight：
Steel wire used as the central strength member
Loose tube filling compound
100% cable core filling
APL moisture barrier

Complies with Standard YD/T 1155-2001 as well as IEC60794－1.

GYTC8A out door optical cable

Stranded Loose Tube Self-supporting Aerial Fig.8 Fiber Optic Cable(GYTC8A) Images